56
3
Check the SIM card information by consulting with the network provider or the SIM card provider.
4
With the ALERTS box checked, only the notification is sent to the server. Setting is not allowed only with image.
With both checked, both of them are sent to the server upon occurrence of event.
5
The device number is the phone number for the SIM. The device automatically attempts to retrieve the number
from the SIM but some service providers do not allow it. Then you have to manually enter the phone number
to enable the voice call feature.
7
When formatted, the file system is FAT32 and the cluster size is 64 KB.
If the network is connected with the network service provider, the blue LED will blink. If the network is also
connected with the server, it will be ON constantly. It should be turned on constantly to monitor the vehicle
from the server.
If initial APN setup is correctly done and a device is successfully connected to the server, the settings can also
be configured from the user webpage.
To Next Page
Loading...