ViSAGE VDU - Tools and Initial Setup; Disassembly and Component Removal

Club Car Precedent Cart Install - Visage
Club Car Precedent Cart Install - Visage
Tools Required
cordless drill
10mm wrench
10mm socket
T40 Torx tip
1" drill bit--spade bit, step bit, or hole saw
tin snips or sharp utility knife
#3 Phillips screwdriver
#2 Phillips screwdriver
flush cutters
Remove the 4 forward roof bolts, nuts, and washers.
Place them in the golf ball tray for later re-installation.
Remove the lower strut cover 10mm bolt.
save for later reinstall.
Club Car Precedent Cart Install - Visage - 1