Install the new strut (with visage power cable)
1. pull the plastic lower strut cover off the old strut and slide it on the new.
2. re-install the torx bolts
3. re-install the windshield hardware.
Cut a notch in the plastic fender panel as shown.
This notch is for the cable to pass through when you re-install the fender panel. Make sure it lines up
with where the cable comes out of the strut.
Push the cable through the hole and into the wheel well.
Re-install the fender panel and lower strut cover.
Club Car Precedent Cart Install - Visage - 3
To Next Page
Loading...