47
Viscount Physis OrgansReference Manual
9.10 SETTING THE ROUTING OF THE VOICES ON THE REAR AUDIO
OUTPUTS (EXT. OUT ROUTER function)
One of the Physis organs’ key features is the capability of simulating the position of the wind-chests and
the arrangement of the pipes inside them, for every stop. This is achieved by setting the routing of the audio
signals, i.e. the way in which they are distributed, on the rear outputs.
For each stop, the system is able to set an output configuration which reflects the layout of the pipes in real
wind-chests, as follows:
- single or double cusp
- double wing
- left or right wing
- mono
- alternate keys
Moreover, each of these layouts can be further specified with regard to the width of the wind-chest and its
location in space, defined by the number of outputs used.
NOTE
For further information about the types of windchest and how they work, see the par. 14.3.
To access the rear audio output setting video page, select the EXT. OUT ROUTER field in the SET-UP
menu:
4 manuals models
3 manuals models
2 manuals models
To Next Page
Loading...
