EN - 18
8. ADDITIONAL FUNCTIONS
8.1 ENERGY SAVING MODE
To avoid unnecessary use of electric energy, the instrument switches off
automatically after 30 minutes of inactivity (of keyboard, panel, pedals
and lack of received MIDI data). However it is possible to disable this
function.
To do so, press and hold the [PLAY] and [METRONOME/ STYLE] buttons,
and press the A#0 key.
To reactivate the function, press and hold the [PLAY] and
[METRONOME/STYLE] button, then press the key A#0.
8.2 DISABLING THE TRANSMISSION OF MIDI DATA
It is possible to disable the transmission of any MIDI data via the
[USB TO HOST] port.
To do so, press and hold the [PLAY] and [METRONOME/STYLE]
buttons, and press the key F1 .
To activate the data transmission, press and hold the [PLAY] and
[METRONOME/STYLE] buttons, then press the key F1.
8.3 AVOIDING DOUBLE NOTES WITH A COMPUTER
If the instrument is connected via USB to a computer running MIDI
applications, this might cause double notes, as most of these
applications have a "Thru" function enabled, to transmit received
data. To avoid transmitting double notes, the keyboard must be
virtually disconnected from the sound generation tool (
Local Off
).
The sound generator will still receive the notes played on the
keyboard, but only through the computer.
To do so, press and hold [PLAY] and [METRONOME/STYLE], and
simultaneously press the key A1.
To reactivate the connection between the keyboard and sound
generator (
Local On
), press and hold [PLAY] and
[METRONOME/STYLE] and simultaneously press the key A#1.
8.4 BUILT-IN SPEAKERS ON/OFF
If necessary, the internal speakers can be disabled. This option is
useful when using headphones or the [OUTPUT] line.
To do so, press and hold the [PLAY] and [METRONOME/STYLE]
buttons, and simultaneously press the C7 key. To reactivate the
speakers, press and hold the [PLAY] and [METRONOME/STYLE]
button, then press C#7.
+
F1
(MIDI OFF)
(MIDI ON)
+
A1
(Local OFF)
(Local ON)
+
A0
(
OFF)
(
)
ON
+
C7
OFF)(Speakers
(Speakers ON)
To Next Page
Loading...
