Table of Contents
VT200/220 Technical Manual, Rev 1.00.01 iv Doc # TM-VT200/220-EN
4.4.2 Securing Load Receptor..................................................................... 44
4.4.3 Checking Seal Status and Audit Trail Counter........................................ 44
5 GENERAL SYSTEM PARAMETERS..................................................... 45
5.1 PAR MENU......................................................................................... 45
5.1.1 Accessing the Menu and Editing Parameters.......................................... 45
5.1.2 PAR Menu Parameters ....................................................................... 46
5.1.3 Dual-scale Connecting And Parameter Settings ..................................... 47
5.2 SETUP 1 (INSIDE SETUP MENU) ............................................................. 47
5.2.1 Accessing the Menu and Editing Parameters.......................................... 47
5.2.2 SETUP 1 Parameters ......................................................................... 48
6 SERIAL COMMUNICATION.............................................................. 49
6.1 SERIAL PORTS CONFIGURATION................................................................. 49
6.1.1 RS232 Serial Port ............................................................................. 49
6.1.2 RS485 Serial Port ............................................................................. 49
6.2 SETTING PORT OUTPUT PARAMETERS .......................................................... 50
6.2.1 Setting Port 1 Output ........................................................................ 50
6.2.2 Setting Port 2 Output ........................................................................ 50
6.3 OUTPUT TYPES .................................................................................... 50
6.3.1 Local Printer..................................................................................... 50
6.3.2 Continuous Weight Output ................................................................. 50
Continuous Weight Data Block Composition LEO Format.....................................................51
Continuous Weight Data Block Composition AND Format ...................................................51
Two-Scale Operation......................................................................................................52
6.3.3 Continuous Weight With Tare ............................................................. 52
Data Block Composition..................................................................................................53
When Display Indication is Not Weight .............................................................................53
6.3.4 Print on Demand............................................................................... 53
6.3.5 Alibi Transmit................................................................................... 54
6.3.6 Alibi Mode Commands ....................................................................... 54
Transmit Displayed Weight ............................................................................................. 54
Command “ZERO” .........................................................................................................54
Print on Demand Character.............................................................................................54
6.3.7 EDP Protocol Output.......................................................................... 55
To Next Page
Loading...
