VISICO Speedlite VS-765 - Advanced Flash Features; AF-assist Beam; Bounce Flash Techniques

8.T akethepicture
Press [PILOT] button, each slave unit fires in
the respective flash modes set. If slave units
do not fire a flash, please adjust the angel or
distance between master unit and slave units.
No matter where the slave unit's flash head is
toward, be sure that its wireless sensor faces
the master unit, and make sure the slave unit
is placed in an effective transmission range of
the master unit. Do not put obstacles between
master flash and slave flash.
AF-assistBeam
When autofocus cannot achieve focus on the subject
in low-light or when contrast is low, the build-in AF-
assist beam will actives automatically to help
autofocus.
Position
Effecive
Range
Center
0.6~10M
Periphery
0.6~5M
BounceFlash
By pointing the flash head toward a wall or ceiling,
the flash will bounce off the surface before
illuminating the subject. This can soften shadows
behind the subject for a more nature-looking shot.
This is called bounce flash.
To set the bounce direction, hold the flash head and
turn it to a satisfying angle.
16