Do you have a question about the VISICO Speedlite VS-765 and is the answer not in the manual?
Flash Modes | TTL, Manual, Multi |
---|---|
Battery Type | 4x AA batteries |
Color Temperature | 5600K |
Vertical Rotation Angle | -7 to 90 degrees |
Flash Duration | 1/200s - 1/20000s |
Tilt Angle | -7 to 90 degrees |
Guide Number | 58 (ISO 100) |
Recycling Time | Approx. 3 seconds |
Horizontal Rotation Angle | 0 to 270 degrees |
Identifies all physical components of the speedlite.
Explains the function of each button on the device.
Instructions for inserting AA batteries into the speedlite.
Steps to mount the speedlite onto the camera's hot shoe.
Guide to powering the speedlite on and checking readiness.
Explains TTL auto flash and setting flash exposure compensation.
How to use manual flash mode and adjust output power.
Using the flash for stroboscopic or multi-flash effects.
How to enable and use high-speed sync on the speedlite.
Camera settings required to enable high-speed sync.
Capturing motion trails with second-curtain synchronization.
Using the flash as an optical slave unit.
Configuring the speedlite as a master or slave unit.
Overview of the three master control modes for wireless flash.
Setting transmission channel and group for slave units.
Setting transmission channel and group for master units.
Step-by-step guide for setting up master and slave units for flash.
How the AF-assist beam aids autofocus in low light.
Techniques for bouncing flash off surfaces for softer light.
Using the catchlight panel for eye reflection.
Adjusting flash coverage manually or automatically.
Using the built-in wide panel for ultra-wide lenses.
How to configure custom functions (Fn01, Fn08, etc.).
Restoring the speedlite to its original factory settings.
Understanding the overheating protection mechanism.
Comprehensive details on flash, exposure, wireless, and power.
Physical dimensions and weight of the speedlite.
Guide to updating the speedlite's firmware via USB.
Recommendations for care, cleaning, and handling.
Solutions for the power switch not turning on or flash not firing.
Troubleshooting steps for when auto zoom fails.
Addressing issues with overexposed or underexposed pictures.
Resolving issues with dark corners or uneven subject illumination.