VISICO Speedlite VS-765 - Maintenance and Updates; Dimension and Weight; Firmware Update Guide; Device Maintenance

FirmwareUpdate
1）Visit VISICO official website (www.visico.com)
to download the firmware upgrading drive and the
firmware of the latest version.
2）Turn off the power, and press and hold [ H/Fn]
button, meanwhile, switch on the power. Then, the
screen will display an interface indicating firmware
upgrade is accessible.
3）Connect the flash to PC with a USB cable (not
included).
4) Follow the tips on the software to finish firmware
upgrade.
Maintenance
If the flash is malfunction during operation, please
switch off power immediately.
The flash should avoid sudden impacts, and the
flash should be dedusted regularly.
It is normal that the flash become warm when in
use. Avoid continuous flash if unnecessary.
Do not attempt to disassemble or service the
unit on your own.
If the flash is failure or get wet by water, don't use
it until it is repaired by professionals.
Note： Only tested camera models are listed
here, not all Nikon cameras. The compatibility
of other camera models, a self-test is
recommended.
Due to our policy of constant product
improvement, we retain the right to modify the
models without notice.
·
·
·
·
·
DimensionandWeight
Weight (without
battery)
Dimension
400g
61x75x190mm
Troubleshooting
If a problem occurs on flash, please first refer to this
troubleshooting guide. If this troubleshooting doesn't
solve the problem, please contact with dealer.
Power switch does not turn on or the flash does
not fire.

21