Vision 5 Series User Manual

Operation 53
© 2019 Vision Engraving Systems
The VisMovUI program will appear. Select the Minimize button.
The Vision Move UI program will now be displayed in the Windows task bar on the right side. It will
either be displayed to the right of the up arrow or it will be displayed when the up arrow is selected.
IMPORTANT: Only one Vision Mov UI spooler can be running per machine at a time. If two are running
at the same time, one will have a red line through it
The Vision Mov UI spooler with the red line through it must be closed. To do this, right click on the icon
and select Shutdown.
and must be closed by
Select Yes on the confirm shutdown window.

Vision 5 Series Specifications

General

Brand	Vision
Model	5 Series
Category	Engraver
Language	English