Vision 5 Series User Manual

Operation 55
© 2019 Vision Engraving Systems
6.2.1 Startup screen
When the Vision controller is powered on and the Vision Move UI spooler is connected, the start up
screen will appear.
Select Start Homing and the machine will initialize and move to the home position. Pressing the Stop
button will stop the machine from moving.
NOTE: The stop button can be pressed when the machine is returning to home if the machine needs to
be stopped for any reason.
HINT: Pressing the Faster button while the machine is moving to the home position will increase the
homing speed until the button is released or the machine reaches the home position.

Vision 5 Series Specifications

General

Brand	Vision
Model	5 Series
Category	Engraver
Language	English