Vision 5 Series User Manual

Vision Series 5 Controller User Manual60
© 2019 Vision Engraving Systems
Pressing the zoom button will return to the standard view.
The scroll bars can also be used as needed when the view is zoomed in.
Select back two times to return to the setup screen.
6.2.4 Run screen
The run screen will be displayed automatically when either a job is sent to the controller (while on the
setup screen), a job is selected from the setup screen or the run button is pressed.

Vision 5 Series Specifications

General

Brand	Vision
Model	5 Series
Category	Engraver
Language	English