Visioneer 7900 - Operational Safety Guidelines; Operational Safety Information; Emergency Power Off

Your Visioneer
®
product and supplies have been designed and tested to meet strict safety requirements.
These include safety agency evaluation and certification, and compliance with electromagnetic regulations
and established environmental standards.
WARNING: The safety and environment testing and performance of this product have been verified
using Visioneer
®
materials only. Unauthorized alterations, which may include the addition of new
functions or connection of external devices, may impact the product certification. Please contact
your Visioneer representative for more information.
Operational Safety Information
Your Visioneer
®
equipment and supplies have been designed and tested to meet strict safety
requirements. These include safety agency examination, approval, and compliance with established
environmental standards.
To ensure the continued safe operation of your Visioneer
®
equipment, follow these safety guidelines at all
times:
Do these:
■ Always follow all warnings and instructions that are marked on or supplied with the equipment.
■ Always use materials specifically designated for this product, the use of other materials may result in
poor performance and create a hazardous situation. Do not use aerosol cleaners, they may be
explosive and flammable under certain conditions.
■ Always exercise care when moving or relocating equipment.
■ Always locate the machine on a solid support surface that has adequate strength to support the weight
of the machine.
■ Always locate the machine in an area that has adequate ventilation and room for servicing.
■ Always unplug this equipment from the electrical outlet before cleaning.
Do not do these:
■ Never attempt any maintenance function that is not specifically described in this documentation.
■ Never remove covers or guards that are fastened with screws. There are no operator serviceable
areas within these covers.
■ Never locate the machine near a radiator or any other heat source.
■ Never override or “cheat” any of the electrical or mechanical interlock devices.
■ Always unplug this equipment from the electrical outlet before cleaning.
Emergency Power Off
If any of the following conditions occur, turn off the scanner immediately and disconnect the power cable(s)
from the electrical outlet(s).
■ The equipment emits unusual odors or makes unusual noises.
■ The power cable is damaged or frayed.
■ A wall panel circuit breaker, fuse, or other safety device has been tripped.
■ Liquid is spilled into the machine.
■ The machine is exposed to water.