5. PROGRAMMING
D-304762 PowerMaster-10/30 G2 Installer's Guide
45
Notes:
1. GPRS cannot be enabled in UL Listed product.
2. SMS is a supplementary feature.
The "04.COMMUNICATION" menu contains several sub-menu options, each covering a group of configurable features
and parameters related to the communication and reporting as follows (see detailed list in Step 3 of the chart below):
Option Description of Option Features and Parameters Section
1:PSTN TEL LINE
Contains configurable features and parameters related to the PSTN telephone line
to which the PowerMaster is connected.
5.6.2
2:GSM/GPRS/SMS
Contains configurable features and parameters related to the Cellular connection
of the PowerMaster system.
5.6.3
3:C.S.REPORTING
Contains configurable features and parameters related to Reporting of event
messages to Monitoring Stations via telephone, cellular or IP broadband
communication.
5.6.4
4:PRIVATE REPORT
Contains configurable features and parameters related to Reporting event
messages to Private Users via telephone or SMS.
5.6.5
5:MOTION CAMERA
Contains configurable features and parameters related to Motion Cameras for
Video Alarm Verification and forwarding of image clips to the Monitoring Station
and other remote subscribers via e-mail and/or MMS network.
5.6.6
6:UP/DOWNLOAD
Contains configurable connection information, access permission and security
codes related to the Upload/Download procedures via PSTN or GPRS.
5.6.7
7:BROADBAND
1,
2
Contains DHCP Client settings, enables to enter LAN parameters and reset
broadband module/settings.
5.6.8
To enter the "04.COMMUNICATION" menu and to select and configure an option, proceed as follows:
Step 1
Step 2
Step 3 Step 4
Select "COMMUNICATION" Select Communication
Sub-menu option
Select the "Communication" Parameter you wish to configure
See
INSTALLER MODE
04.COMMUNICATION
To Next Page
Loading...
