Visonic PowerMaster-30 G2 - APPENDIX A. Specifications; A1. Functional

APPENDIX A. Specifications
74
D-304762 PowerMaster-10/30 G2 Installer's Guide
APPENDIX A. Specifications
A1. Functional
PowerMaster-10 G2 PowerMaster-30 G2
Zones Number 30 wireless zones (including 1 hard-wired
input).
Up to 64 wireless zones, (including 2 hard-
wired inputs).
Hard-wired Zone
Requirements
2.2 k
Ω
E.O.L. resistance (max. resistance of
wires 220 Ω).
2.2 k
Ω
E.O.L. resistance (max. resistance of
wires 220 Ω).
Maximum Loop
Current
1.5 mA 1.5 mA
Maximum Loop
Voltage
3.3 V 3.3 V
Loop Shorted 0.00 – 1.47 V (0.00 – 1.76 KΩ) 0.00 – 1.47 V (0.00 – 1.76KΩ)
Loop Normal 1.47 – 1.80 V (1.76-2.64 KΩ) 1.47 – 1.80 V (1.76 – 2.64 KΩ)
Loop Tampered 1.80 – 2.03 V (2.64-3.52 KΩ) 1.80 – 2.03 V (2.64 – 3.52 KΩ)
Loop Alarm 2.03 – 2.33 V (3.52-5.26 KΩ) 2.03 – 2.33 V (3.52 – 5.26 KΩ)
Loop Open 2.33 – 3.30 V (5.26 - ∞ Ω) 2.33 – 3.30 V (5.26 – ∞ Ω)
Installer and User
Codes
•
1 master installer (9999 by default)*
• 1 installer (8888 by default)*
• 1 master user, no. 1 (1111 by default)
• Users nos. 2 - 8
* Codes must not be identical
•
1 master installer (9999 by default)*
• 1 installer (8888 by default)*
• 1 master user, no. 1 (1111 by default)
• Users nos. 2 - 48
* Codes must not be identical
Control Facilities - Integral keypad, wireless keyfobs and
keypads
- SMS commands via optional GSM/GPRS
module.
Remote control by telephone.
Note: For SIA CP-01 compliance, when using
KF-234 PG2 an external siren must also be
used. CP-01 features not to be enabled in UL
Listed product.
- Integral keypad, wireless keyfobs and
keypads
- SMS commands via optional GSM/GPRS
module.
- Remote control by telephone.
Note: For SIA CP-01 compliance, when using
KF-234 PG2 an external siren must also be
used. CP-01 features not to be enabled in UL
Listed product.
Display Single line, backlit 16-large character LCD. Single line, backlit 16-large character LCD.
Arming Modes AWAY, HOME, AWAY-INSTANT, HOME-
INSTANT, LATCHKEY, FORCED, BYPASS.
Note: AWAY-INSTANT and HOME-INSTANT
are not permissible for CP-01 installations.
AWAY, HOME, AWAY-INSTANT, HOME-
INSTANT, LATCHKEY, FORCED, BYPASS.
Note: AWAY-INSTANT and HOME-INSTANT
are not permissible for CP-01 installations.
Alarm Types Silent, personal panic/emergency, burglary,
gas (CO), and fire.
Silent, personal panic/emergency, burglary,
gas (CO), and fire.
Siren Signals Continuous (intrusion / 24 hours / panic); triple
pulse – short pause - triple pulse... (fire);
four pulses – long pause – four pulses... (gas);
long pulse – long pause – long pulse... (flood).
Continuous (intrusion / 24 hours / panic); triple
pulse – short pause - triple pulse... (fire);
four pulses – long pause – four pulses... (gas);
long pulse – long pause – long pulse... (flood).
Siren (bell) Timeout Programmable (4 min. by default) Programmable (4 min. by default)
Internal Sounder
Output
At least 85 dBA at 10 ft (3 m) At least 85 dBA at 10 ft (3 m)
Supervision Programmable time frame for inactivity alert Programmable time frame for inactivity alert
Special Functions
- Chime zones
- Diagnostic test and event log.
- Local and Remote Programming over
Telephone, GSM /GPRS connections.
- Calling for help by using an emergency
transmitter.
- Tracking inactivity of elderly, physically
handicapped and infirm people.
Note: Tracking inactivity of elderly not to be
enabled in UL Listed product.
- Chime zones
- Diagnostic test and event log.
- Local and Remote Programming over
Telephone, GSM /GPRS connections.
- Calling for help by using an emergency
transmitter.
- Tracking inactivity of elderly, physically
handicapped and infirm people.
- Message center (recording and playback)
- Two-way voice communication
Note: Tracking inactivity of elderly not to be
enabled in UL Listed product.
Data Retrieval Alarm memory, trouble, event log Alarm memory, trouble, event log