Visonic PowerMaster 360

ELECTRICAL APPLIANCE CONTROL
D-307503 PowerMaster 360 User's Guide 13
Initiating fire alarm
1
or emergency alarm
You can generate a fire alarm or a silent emergency alarm in disarmed & armed states, as follows:
PRESS
RESULTING DISPLAY
FIRE ALARM
OR
EMERGENCY
for 2 seconds
Then, if or when the system is
in the disarmed state:
READY HH:MM
(alternating)
READY MEMORY
To stop the alarm, press and then key in a valid user code.
Chime ON or Chime OFF
To disable or enable the chime zones, click the key and click again to disable, see Appendix A for
details.
PRESS
RESULTING DISPLAY
CHIME ON
CHIME OFF

READY HH:MM
CHIME indicator lights steadily when “chime on” is selected.
1
This function is disabled in ACPO compliant version