MENUS AND FUNCTIONS
D-307503 PowerMaster 360 User's Guide 25
To assign the tag to another user, for example, "User No. 5", key in [05] or
alternatively click the or button until the display reads
[T05:Tag (Prox)] and then press to confirm.
The display reads [
DEVICE ENROLLED
] a "Success Tune" ☺ sounds and
the display will then change to [
T01:Tag (Prox)
].
5 6
B. To set partition authorization
C. To delete a proximity tag
Enter the [USER SETTINGS] menu, select the [PROXIMITY TAGS] option
and press .
1
The display will read [ADD NEW TAG].
Click the button until the display reads [DELETE TAG].
The display will read [T01:Tag (Prox)].
2, 7
Key in the tag number you wish to delete, for example, [05] or alternatively
click the or button until the display reads the tag number,
[T05:Tag (prox)].
When the tag you wish to delete appears on the display, press .
The display now reads [<OFF> to delete].
8
To delete the tag press the button.
A "Success Tune" ☺ sounds and the display reads [
DELETE TAG
] and
returns to step 3.
12
Additional Information (section B.6)
For detailed instructions on how to select User Settings – refer to sections A.1 and A.2.
The display shows the first enrolled Tag (Tag No.1) of the 8 tags.
To abort enrollment press the button.
If the tag was previously enrolled in the system, the Virtual Keypad display reads [
ALREADY ENROLLED
]
and then switches to the name of the tag alternating with its ID number.
If Partition is enabled, continue to step 6.
When PARTITIONING is enabled.
The display will read [T05:PARTITIONS].
9
Use the keypad keys , , to change the status of the
partitions P1, P2 & P3, respectively.
10
When you are satisfied with the setting, for example, User 5 is authorized
with Partition 1 and 3 only, press to confirm.
A "Success Tune" ☺ sounds. The display confirms the Partition setting.
11
To Next Page
Loading...
