Visonic PowerMaster 360

MENUS AND FUNCTIONS
D-307503 PowerMaster 360 User's Guide 27
or
To assign the keyfob to another user, for example, "User No. 5", key in [05] or
alternatively click the or button until the display reads
[F05:Keyfob] and then press to confirm.
F05:keyfob
☺ Return to step 2
The display reads [ DEVICE ENROLLED ] or [ ID accepted ] if the keyfob was
enrolled manually by entering the ID number, a "Success Tune" ☺ sounds
and the display will then change to [ F01:Keyfob ].
5 6
B. To set partition authorization

6.
F05:PARTITIONS
The display will read [F05:PARTITIONS]. To enter the menu, press .
10
7.
F05: P1 P2 P3
Use the keypad keys , , to change the status of the
partitions P1, P2 & P3, respectively.
11
F05: P1 P2 P3
When you are satisfied with the setting, for example, User 5 is authorized with
Partition 1 and 3 only, press to confirm.
☺ Return to step 2
A "Success Tune" ☺ sounds. The display confirms the Partition setting.
12
C. To delete a keyfob
1.
KEYFOBS
Enter the [USER SETTINGS] menu, select the [KEYFOBS] option and press
.
1
2.
ADD NEW KEYFOB
The display will read [ADD NEW KEYFOB].
Click the button until the display reads [DELETE KEYFOB].
3.
DELETE KEYFOB
Press .
F01:keyfob
The display will read [F01:Keyfob] alternating with the ID number of the keyfob.
3
4.
or
Key in the keyfob number you wish to delete, for example, [06] or
alternatively click the or button until the display reads the
keyfob number, for example, "F06:Keyfob" and "ID No. 300-5799".
F06:keyfob
When the keyfob you wish to delete appears on the display, press .
7
ID No. 300-6108
5.
<OFF> to delete
The display now reads [<OFF> TO DELETE].
8
6.
☺ Go to step 3
To delete the keyfob press the button.
13
DELETE KEYFOB
A "Success Tune" ☺ sounds and the display reads [ DELETE KEYFOB ]
and returns to step 3.
14

When PARTITIONING is enabled.