Visonic PowerMaster 360 - Page 34

MENUS AND FUNCTIONS
34 D-307503 PowerMaster 360 User's Guide
disable report 
The display shows the currently selected option.
7.
or
Click the or button until the display reads the event group
you wish to be reported via SMS, for example, [alarm].
8
alarm
8.
When you are satisfied with the setting, press to confirm.
alarm 
A "Success Tune" ☺ sounds. The display confirms the set events to be
reported, and returns to step 6.
4, 10
☺ Return to step 6
B. To program events to be reported using MMS through the server
9.
PRIVATE REPORT
Enter the [USER SETTINGS] menu, select the [PRIVATE REPORT] option
and press .
1
10.
SMS REPORT
When the display reads [SMS REPORT] press repeatedly until the
display reads [SMS/MMS BY SRVR].
11.
SMS/MMS BY SRVR
To enter this option, press . The display reads [1st SMS/MMS].
12.
1st SMS/MMS
Click the or button until the display reads the MMS phone
number you wish to program (out of 4 MMS numbers), for example, [2nd
SMS/MMS], and press .
or
2nd SMS/MMS
Telephone num.
The display reads [Telephone num.].
13.
Click the button repeatedly until the display reads [MMS Events].
14.
MMS Events
Press the button.
disable report 
The display shows the currently selected option.
15.
or
Click the or button until the display reads the event group
you wish to be reported via MMS, for example, [alarm].
9
alarm
16.
When you are satisfied with the setting, press to confirm.
alarm 
A "Success Tune" ☺ sounds. The display confirms the set events to be
reported, and returns to step 14.
4, 10
☺ Return to step 14
C. To program MMS and SMS telephone numbers
17.
Continue from step 4 in section A. “To Program Events to be Reported by
SMS via the server”
18.
1st SMS/MMS
Click the or button until the display reads the SMS/MMS
telephone number you wish to program or edit (out of 4 SMS/MMS numbers),
for example, "2nd SMS/MMS", and press .
or
2nd SMS/MMS
19.
Telephone num.
When the display reads [Telephone num.], press