USER SETTINGS
24 DE5468U
7. User Settings
What are the Settings You Need?
The installer provides you with a ready-to-use alarm
system, but a few settings and adjustments will still
be needed.
Note: Although the user settings are your
responsibility, you may request your installer to
perform them for you (except for the user codes which
you would like to keep secret).
The user settings include (if enabled by the installer):
• Bypassing zones - determining which zones
will be bypassed (disabled) during the present
disarm period and the next armed period.
• Reviewing the bypass list - "show bypass" -
displaying the numbers and names of bypassed
zone one by one.
• Recalling the last bypassing scheme - "recall
bypass" - re-using the previous bypassing
scheme, which becomes suspended after
disarming but is still saved in the PowerMax Pro
memory.
Note: RECALL BYPASS is applicable in Non-
Partition menu only.
• Programming the 4 telephone numbers* -
determining the 1
st
, 2
nd
, 3
rd
and 4
th
telephone
numbers to which the system will report event
messages that were defined by the system installer.
• Setting user codes* - programming a security
code for yourself and additional 7 codes for
other system users. Codes 5 through 8 are
“Latchkey” user codes (see Chapter 2 - Arming
in the Latchkey Mode for additional details).
• Enrolling keyfob transmitters* - teaching the
PowerMax Pro system to recognize the ID code of
each keyfob transmitter (multi-button, CodeSecure™
type, wireless transmitter), so that the PowerMax Pro
can respond to commands transmitted by them.
• Enrolling proximity tags - teaching the
PowerMax Pro to recognize the ID of each
proximity tag so that the PowerMax Pro can
respond to proximity tags presentation.
• Setting voice options* - enabling or disabling
verbal announcements (prompts).
• Using squawk option* - enabling/disabling
LOW/MID/HI squawk (short siren sound) upon
arming and disarming by keyfob. All the options are
applicable for wireless siren. For wired siren, refer
to LOW, MID and HI options as "squawk enable".
• Setting the time and time format* - adjusting
the built-in clock to show the correct time and
time format.
• Setting the date and date format* - adjusting
the built-in calendar date and date format.
• Enrolling PowerLink - enrolling/deleting the
PowerLink (PowerMax Pro Web based remote
controller) and enabling/disabling PowerLink
failure reporting.
• Setting the scheduler* - setting schedule for
sensors start/stop activation.
• Show log – enabling or disabling the event log
where events are displayed in chronological order -
from the newest to the oldest.
* This option can be accessed only if master user
code has been entered.
Entering the User Settings Menu
Figure 7 describes how to enter User Settings menu
(when all zones/partitions are secured) for the
Partition and non-Partition system.
Click the keys that you are instructed to press. The
resultant display is shown below each instruction
ENTER CODE _ _ _ _
READY 00:00
NORMAL MODE
USER SETTINGS
[master/ user code]
SHOW BYPASS
SET PHONE NUMBER
SET USER CODES
(*)
(*)
SET BYPASS
ENROLL KEYFOB
(*)
ENROLL PROX TAG
(*)
SQUAWK OPTION
SET TIME&FORMAT
SET DATE&FORMAT
<OK> TO EXIT
SET VOICE OPTION
(*)
(*)
(*)
(*)
(*)
DEFINE PWRLNK
(**)
INSTALLER MODE
(*)
SCHEDULER
(*)
* Menu items that are marked
with an asterisk can be
accessed only if master
user code has been entered.
** INSTALLER MODE is
displayed only if USER
PERMIT ENABLE was
selected by the installer.
Instruction: Enter 4-digit
master
user code (default “1111”), or
user code (see note below).
These menu items are displayed
only if “bypass” was enabled by
the installer.
READY 00:00
WALK TEST
PowerMax Pro Older versions of
PowerMax pro menu
RECALL BYPASS
RECALL BYPASS is applicable
in Non-Partition menu only.
Figure 7 - Entering User Settings Menu
The next paragraphs include User Settings instructions,
step-by-step. However, if you want to get an overall
view of the entire User Settings menu, refer to figure 8 -
User Setting flow-chart. You can use the flow chart as
your only guide along the user settings process, instead
of going through the step-by-step instructions.
Bypassing Zones
A. General Guidance
You can program the PowerMax Pro to exclude (bypass)
selected zones, regardless of whether these zones are
"functional" (undisturbed) or "open" (disturbed).
Bypassing permits free movement of people within
certain zones although the system is armed. It is also
To Next Page
Loading...
