USER SETTINGS
DE5468U 33
The black rectangle at the right side indicates that in
case of PowerLink failure it will not be reported by
the control panel. To enable PowerLink failure
reporting, click
. The display will read:
report
Click .
report
Click
2: PWRLNK FAILURE
Success is accompanied by short beeps, failure by
long beep.
To return to the main menu, click
. The display
will revert to:
<OK> TO EXIT
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
. When <OK> TO EXIT is displayed - click
.
D. PowerLink Failure Reporting Disabling
Perform the actions described in step A above until
the display reads:
1: INSTALL
Click to change the display to:
2: PWRLNK FAILURE
Click to change the display to:
report
The black rectangle at the right side indicates that in
case of PowerLink failure it will be reported by the
control panel. To disable PowerLink failure reporting,
click
. The display will read:
disable report
Click .
disable report
Click
2: PWRLNK FAILURE
Success is accompanied by short beeps, failure by
long beep.
To return to the main menu, click
. The display
will revert to:
<OK> TO EXIT
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
. When <OK> TO EXIT is displayed - click
.
Scheduler Function
The Scheduler enables to start and stop activity of
the desired sensors. You can select the day
(Sunday, Monday, Tuesday, Wednesday, Thursday,
Friday, Saturday, or daily) and then select the
scheduled activity start/stop of the desired sensor.
The process is demonstrated in "figure 8 DETAIL A".
To Next Page
Loading...
