2 DE5467U
Dear Customer,
Thank you for choosing PowerMax+, a highly advanced wireless alarm control system produced by Visonic Ltd.
Please note below the installer's telephone number to facilitate obtaining assistance.
Company Name: ______________________________________
Telephone Number: ___________________________________
Person to Contact: ____________________________________
Also please make sure that you have the name and telephone number of the central station your system will report to. If
you ever call the central station to ask questions, you should be able to come up with your "ACCOUNT NUMBER" used
to identify your alarm system to the central station. Obtain this information from your installer and write it down below.
Monitoring Station’s Name _____________________________
Telephone Number: ___________________________________
My Account Number: __________________________________
If your system was set by the installer to contact private telephone numbers, note down the 4 telephone numbers that
your installer programmed to be called:
Phone No. 1: _________________________________________
Phone No. 2: _________________________________________
Phone No. 3: _________________________________________
Phone No. 4: _________________________________________
SUMMARY OF AUDIBLE SIGNALS
Sound Sequence Significance
(-)
Once only A key in the keypad has been pressed
(- -)
Once only The system reverts automatically to the previous state
(- - -)
Once per minute A state of trouble is presently being detected
☺
(- - - –––––)
Once only Command / operation carried out successfully
(––––––––)
Once only Illegal command - wrong code - refusal to obey
Slow beeping at first (- - - - - -)
and faster beeping throughout the
last 10 seconds (- - - - - - - - ).
Once only, throughout a
time delay determined by
the installer.
Exit delay warning upon arming the system; also entry
delay warning upon entry via a delay zone.
(–––––––––––––––––––––––––––)
Continuous tone upon
arming (lasts until the
last 10 seconds of the
exit delay).
“Forced arming” is taking place while the system is “not
ready” (the tone stops by clicking the arming button once
more).
(ding-dong)
Once only A chime zone is being disturbed (while the system is in
the disarmed state).
LUMINOUS INDICATOR SIGNALS
LED Behavior Significance
ARM
Lights steadily
Flashes
No light
The system is in the armed state (AWAY MODE)
The system is in the armed state (HOME MODE)
The system is presently in the disarmed state
TROUBLE
Lights steadily
No light
A state of trouble is presently being detected
No trouble - all is well
CHIME
Lights steadily
No light
The chime function is active - chime zones will chime when disturbed
The chime function is inactive - chime zones will not chime when disturbed
POWER
Lights steadily
No light
AC power is supplied to the control panel
The system is operating on backup battery power
To Next Page
Loading...
Need help?
General
