™
Page 52 of 81
6 Loc3-10Tx Transmitter
To enter the “Frequency Menu” proceeds as follows:
1. Press the “i” pushbutton four to six times (based on the mode that transmitter is in) until reaching the “Frequency menu”
sub-menu.
In Direct Connection mode,
Volume
Voltage
Resistance
Multi Frequency
LCD Contrast
Bluetooth Menu
Frequency Menu
In SD mode,
Volume
Resistance
LCD Contrast
Bluetooth Menu
Frequency Menu
In Clamp mode,
Volume
Voltage
LCD Contrast
Frequency Menu
Bluetooth Menu
2. Screen will show a list of frequencies available, with the central one in a box.
Frequency Menu
SD-USA
FF Low
FF High
3. Pressing the “+” or “-” pushbuttons, you can scroll up or down through the available frequencies.
To Next Page
Loading...
Need help?
General
