Vivitek D330MX - OSD Menu Setting

DLP Projector—User’s Manual
Advanced Feature
Press the Menu button to open the OSD menu. Press ◄► to move to the Installation II menu.
Press ▲▼ to move to the Advanced menu and then press Enter or ►. Press ▲▼ to move up and
down in the Advanced menu. Press ◄► to change values for setting.
ITEM DESCRIPTION
Press Enter / ► to enter the OSD setting menu. See page
33 for more information on OSD
Menu Setting
OSD Menu Setting
.
– 32 –
Peripheral Test
Press Enter/ ► to enter the Peripheral Test menu. See page
33 for more information on
Peripheral Test.
After replacing the lamp, this item should be reset. See page
34 for more information on Lamp
Hour Reset
Lamp Hour Reset
.
Low Power Mode Press ◄► to turn Low Power Mode on or off.