VivoLink VLHDMIMAT4X4 - 6 RS232 Control; Installation;Uninstallation of RS232 Control Software; Basic Settings

4K 4x4 HDMI2.0 Matrix Switcher
9
6. RS232 Control
6.1 Installation/uninstallation of RS232 Control Software
 Installation Copy the control software file to the computer connected with
VLHDMIMAT4X4.
 Uninstallation Delete all the control software files in corresponding file path.
6.2 Basic Settings
Firstly, connect VLHDMIMAT4X4 with necessary input devices and output devices.
Then, connect it with a PC installed RS232 control software. Double-click the software
icon to run this software.
Here we take the software CommWatch.exe as example. The icon is showed as below:
Figure 6- 1 Icon of
CommWatch
The interface of the control software is showed as below:
Figure 6- 2 Control Interface of
CommWatch
Parameter Configuration
Monitoring area, indicates
whether the command
sent works.
Command Sending area