4K 4x4 HDMI2.0 Matrix Switcher
20
All ten scenes are shown in above interface.
Select a scene and then click “Load” can invoke the selected scene.
Click “Cancel” to cancel the current operation.
7.3.2 I/O connection switching
Click to enter the following interface, it provide intuitive I/O connection
switching.
Figure 7- 7 Control Menu
The button matrix displays every possible connection between every input and output;
users can carry on the connections by clicking corresponding button.
Buttons 1~4 at the right-bottom corner provides quick saving and recall for overall
connection status. For example:
Step1: Select button1 at INPUT column
Step2: Select button 1 at OUTPUT column (If all OUTPUT ports in needed, you only
need to click “All”.)
Step3: Choose a scene that you want to save.
Step4: Click “Confirm” to save the setting or Click “Clear” to clear set up.
To Next Page
Loading...
