4K 4x4 HDMI2.0 Matrix Switcher
26
7.4 TCP/IP Port Configuration
IP address, subnet mask, and Gateway of VLHDMIMAT4X4 can be modified via GUI
from the above description, but beyond that users can configure the IP port, including IP
reset, password reset, and IP module firmware update on the WebServer.
Type the designed website (Default: 192.168.0.178:100, changeable) in your browser.
Enter correct username and password to log in the WebServer:
Username: admin; Password: admin
Here is the main configuration interface of the WebServer:
Figure 7- 16 TCP/IP Configuration
7.5 GUI Update
GUI for VLHDMIMAT4X4 supports online update in http://192.168.0.178:100. Type the
username and password (the same as the GUI log-in settings, modified password will
be available only after rebooting) to log in the configuration interface. After that, click
Administration at the source menu to get to Upload Program as shown below:
Figure 7- 17 GUI Update
To Next Page
Loading...
