4K 4x4 HDMI2.0 Matrix Switcher
3
2.2 Rear Panel
Figure 2- 2 Rear Panel
No. Name Description
① INPUTS
HDMI input ports, 4 in total, connect with HDMI
sources.
② OUTPUTS
SPDIF: audio output ports for de-embedded HDMI
audio, 4 in total.
HDMI: 4 in total, connect with HDMI displays.
③ CONTROL
EDID: 4-pin EDID DIP switchers to set EDID data, “1”
stands for “On”, “0” stands for “Off”. Refer to
4.2 EDID
Configurarion for more detials.
RS232: Serial control port, connect with control device.
IR IN: Connects with external IR receiver for using the
IR remote to control the Matrix Switcher.
Connect control PC for TCP/IP control.
④ DC 24V Connect with 24VDC 1.25A power adaptor.
⑤ Ground Connect to ground.
Pictures shown in this manual are for reference only.
1 2 3 4
ON DIP
INPUTS
OUTPUTS CONTROL
SPDIF
SPDIF SPDIF SPDIF
1
2
3
41 42
3
On
Off
1 2 3
4
1
0
Tx Rx
TCP/IPEDID IR IN
R S 2 3 2 DC 24V
4
5
1 2
3
To Next Page
Loading...
