VivoLink VLHDMIMAT4X4 - Scene Commands; HDCP Compliance; EDID Configuration

4K 4x4 HDMI2.0 Matrix Switcher
12
Out 1 1920x1080P
Out 2 1920x1080P
Out 3 1920x1080P
Out 4 1920x1080P
6.3.4 Scene Commands
Command
Function
Feedback Example
Save[Y].
Save the present operation to the
preset command [Y], ranges from 1 to
10.
Save To F6
Recall[Y].
Recall the preset command [Y].
Recall From F2
Clear[Y].
Clear the preset command [Y]. Clear F8
6.3.5 HDCP Compliance
Command
Function
Feedback Example
/%[Y]/[X]:[Z].
HDCP management command.
Y=O is for output;
X=1~4 is the number of the port, if the
X=ALL, it means all ports;
Z is for HDCP compliant status, the
value may be 1 (HDCP compliant) or 0
(not HDCP compliant).
/%O/ALL:0.
%0801.
Auto HDCP management, activate
carrier native mode
%0801
%9973.
Query the HDCP status of the input
signals.
In 01 02 03 04
HDCP Y N Y N
%9974.
Query the HDCP status of the output
signals.
Out 01 02 03 04
HDCP Y N Y N
6.3.6 EDID Configuration
The DIP switcher status should be set as 1111 to enable Software EDID management
mode: RS232 control or Web-based GUI control.
Command
Function
Feedback Example
EDIDH[x]B[y].
Input port [y] learns the EDID from
output port [x].
If the EDID data is available and the
audio part supports not only PCM
EDIDH1B1