4K 4x4 HDMI2.0 Matrix Switcher
15
7. TCP/IP Control
7.1 Control Modes
TCP/IP default settings: IP is 192.168.0.178, Gateway is 192.168.0.1, and Serial Port is
4001. IP can be changed as you need, Serial Port cannot be changed.
Controlled by single PC
Connect a computer to the TCP/IP port of the VLHDMIMAT4X4, and set its network
segment to the same as the default IP of the VLHDMIMAT4X4 (192.168.0.178).
Figure 7- 1 Modify the IP of PC
Controlled by PC(s) in LAN
The VLHDMIMAT4X4 can be connected with a router to make up a LAN with the PC(s),
this make it able to be controlled in a LAN. When control, just make sure the
VLHDMIMAT4X4’s network segment is the same with the router. Please connect as the
following figure for LAN control.
Same network
segment as the
To Next Page
Loading...
