VIVOTEK
98 - User's Manual
PTZ > PTZ settings
Advanced Mode
This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation.
The e-PTZ fucntion allows users to quickly move the focus to a target area for close-up viewing
without physically moving the camera. Please refer to below for detailed instruction.
Digital PTZ Operation (E-PTZ Operation)
If you select “Digital“, the e-PTZ control settings section will be displayed as shown below:
Select Stream: Select stream #1 to set up the e-PTZ control. Please note that each stream can possess
its own preset and patrol settings. For detailed information about how to set up preset and patrol settings,
please refer to page 98.
2010/12/10 17:08:56
2011/12/10 17:08:56
To Next Page
Loading...
