Vivotek FD8171 - Region of Interest; Eptz Setting

VIVOTEK
192 - User's Manual
7.33 Region of interest
Group: roi_c<0~(n-1)> for n channel product, and m is the number of streams which support ROI.
(capability.eptz > 0)
PARAMETER VALUE Default SECURITY
(get/set)
DESCRIPTION
s<0~(m-1)>_home <coordinate> <product
dependent>
1/6 ROI left-top corner coordinate.
s<0~(m-1)>_size <window size> <product
dependent>
1/6 ROI width and height. The width
value must be multiples of 16 and the
height value must be multiples of 8
7.34 ePTZ setting
Group: eptz_c<0~(n-1)> for n channel product. (capability.eptz > 0)
PARAMETER VALUE Default SECURITY
(get/set)
DESCRIPTION
osdzoom <boolean> 1 1/4 Indicates multiple of zoom in is
“on-screen display” or not
smooth <boolean> 1 1/4 Enable the ePTZ "move smoothly"
feature
tiltspeed -5 ~ 5 0 1/7 Tilt speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
panspeed -5 ~ 5 0 1/7 Pan speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
zoomspeed -5 ~ 5 0 1/7 Zoom speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
autospeed 1 ~ 5 1 1/7 Auto pan/patrol speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
Group: eptz_c<0~(n-1)>_s<0~(m-1)> for n channel product and m is the number of streams which support
ePTZ. (capability.eptz > 0)
PARAMETER VALUE Default SECURITY
(get/set)
DESCRIPTION