Vivotek IP8132 - Page 140

VIVOTEK
140 - User's Manual
protocol_rtp_http <boolean> 0/7 Indicate whether to support RTP over
HTTP.
protocol_spush_mjpeg <boolean> 0/7 Indicate whether to support server push
MJPEG.
protocol_snmp <boolean> 0/7 Indicate whether to support SNMP.
protocol_ipv6 <boolean> 0/7 Indicate whether to support IPv6.
videoin_type 0, 1, 2 0/7 0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
videoin_resolution <a list of available
resolution
separated by
commas>
0/7 Available resolutions list.
videoin_maxframerate <a list of available
maximum frame
rate separated by
commas>
0/7 Available maximum frame list.
videoin_codec
mpeg4. mjpeg,
h264
0/7 Available codec list.
videoin_streamcodec
<integer> 0/7 Each stream has its own support codec type.
It is bitwise depends on videoin_codec.
bit0: mpeg4
bit1: mjpeg
bit2: h264
First stream support mjpeg and h264
(bit0:0, bit1:1, bit2:1)
videoout_codec
<a list of the
available codec
types separated by
commas)
0/7 Available codec list.
audio_aec <boolean> 0/7 Indicate whether to support acoustic echo
cancellation.
audio_mic <boolean> 0/7 Indicate whether to support built-in
microphone input.
audio_extmic <boolean> 0/7 Indicate whether to support external
microphone input.
audio_linein <boolean> 0/7 Indicate whether to support external line
input.
(It will be replaced by audio_mic and
audio_extmic.)