Vivotek IP8132 - Page 141

VIVOTEK
User's Manual - 141
audio_lineout
<boolean> 0/7 Indicate whether to support line output.
audio_headphoneout <boolean> 0/7 Indicate whether to support headphone
output.
audioin_codec
gamr, g711 0/7 Available codec list for audio input.
uart_httptunnel <boolean> 0/7 Indicate whether to support HTTP tunnel
for UART transfer.
camctrl_privilege <boolean> 0/7 Indicate whether to support “Manage
Privilege” of PTZ control in the Security
page.
1: support both /cgi-bin/camctrl/camctrl.cgi
and /cgi-bin/viewer/camctrl.cgi
0: support only /cgi-bin/viewer/camctrl.cgi
transmission_mode
Tx,
Rx,
Both
0/7 Indicate transmission mode of the machine:
TX = server, Rx = receiver box, Both =
DVR.
network_wire <boolean> 0/7 Indicate whether to support Ethernet.
network_wireless <boolean> 0/7 Indicate whether to support wireless.
wireless_s802dot11b <boolean> 0/7 Indicate whether to support wireless
802.11b+.
wireless_s802dot11g <boolean> 0/7 Indicate whether to support wireless
802.11g.
wireless_beginchannel 1 ~ 14 0/7 Indicate the begin channel of wireless
network
wireless_endchannel 1 ~ 14 0/7 Indicate the end channel of wireless
network
wireless_encrypt_wep <boolean> 0/7 Indicate whether to support wireless WEP.
wireless_encrypt_wpa <boolean> 0/7 Indicate whether to support wireless WPA.
wireless_encrypt_wpa2 <boolean> 0/7 Indicate whether to support wireless WPA2.
derivative_brand <boolean> 0/7 Indicate whether to support the upgrade
function for the derivative brand. For
example, if the value is true, the VVTK
product can be upgraded to VVXX.
(TCVV<->TCXX is excepted)
evctrlchannel <boolean> 0/7 Indicate whether to support HTTP tunnel
for event/control transfer.
joystick <boolean> 0/7 Indicate whether to support joystick control.
storage_dbenabled <boolean> 0/7 Media files are indexed in database.
nanystream 0, <positive 0/7 number of any media stream per channel