Vivotek ND8312 Hardware Installation Guide


4. How to retrieve system alarm?
Please refer to page 84 for how to configure system alarm triggers. When the
alarm is triggered, e.g., by digital inputs or motion detection, an alarm
message will prompt on the screen.
Usethe>arrowbuttontobrowsethroughthealarmmessages.

If the alarm is configured with video recording as the responding action, you
can click on the alarm entry. The
Playback
window will appear, allowing an
instant playback of the alarm-related footage. You will enter the "Search alarm
results" page even if the alarm does not trigger a recording action.


5. Why live view is unavailable?
The default live view receives a camera's stream #1. If a camera's stream #1 is
configured using MPEG-4 as the video codec, the following message will
prompt.
YoucangototheSettings>Camera>Media>Videowindowtoconfigurethevideo
codecofstream#1intoH.264.Thesamewilloccurifyouconnectsomenewer
VIVOTEK9xxxseriesH.265models.YouwillthenneedtochanagetheCH1andCH2

Vivotek ND8312 Specifications

General

Brand	Vivotek
Model	ND8312
Category	Network Hardware
Language	English