Below is the PTZ panel that appears with ordinary PTZ cameras
1.
PTZ
control: Click on the arrow buttons to move towards the direction you
wish to move to.
2.
Focus
: Click on the Focus near and Focus far buttons to adjust camera
focus.
3.
Zoom
: Use the Zoom in and Zoom out buttons to adjust the camera's zoom
ratio.
4.
Presets
: If you configured preset positions, a list of preset positions will
appear.
5.
Speed
: Adjusts the speed when moving across the field of view.
6.
Patrol
: If you configured preset positions into a patrolling tour, click on this
button and the camera will proceed with patrolling through the preset points.
This portal appears with a fisheye camera. The PiP and PTZ buttons will then
be disabled for a fisheye camera.
To Next Page
Loading...
Need help?
General
