Vivotek NR8201 - Page 45

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 45
FTP Server
FTP Server: Enter the domain name or IP address of the FTP server.
Port: By default, the FTP server port is set to 21. It can also be assigned to another port number between
1025 and 65535.
Username: Enter the login name of the FTP account.
Password: Enter the password of the FTP account.
Folder: Enter an existing folder on FTP sever to place the media le.
When the setup is done, you may try to conrm the settings by clicking on Send test FTP. Then, click
Save to enable the settings.
E-mail Server
Mail Server: Enter the domain name or IP address of the e-mail server.
Port: The default mail server port is set to 25. You can manually set another port.
Username: Enter the user name of the e-mail account.
Password: Enter the password of the e-mail account.
Sender Email Address: Enter the e-mail address of the sender.
Recipient Email Address: Enter the e-mail address of the recipient.
When the setup is done, you may try to conrm the settings by clicking on Send test E-mail. Then, click
Save to enable the settings.