VIVOTEK
User's Manual - 45
Please follow the steps below to set up a prole:
1. Select the Enable and apply this prole to checkbox.
2. Select the applicable period of time this profile will
apply to.
3. Configure Exposure control settings in the folowing
columns. Please refer to previous dicussions for
detailed information.
4. Click Save to enable the setting and click Close to exit
the window.
Exposure Prole:
If you want to congure another sensor and exposure setting for an individual day/night/schedule mode,
please click Prole to open the Prole of exposure settings page as shown below.
Activated period: You can s
elect the Schedule mode to this prole. Please manually enter a range of time
if you choose Schedule mode. Then check Save to take effect.
To Next Page
Loading...
Need help?
General
