Vivotek PZ7112 - Page 106

VIVOTEK
106 - User's Manual
<positive integer>
npir 0,
<positive integer>
0/7 Number of PIRs.
ndi 0,
<positive integer>
0/7 Number of digital inputs.
ndo 0,
<positive integer>
0/7 Number of digital outputs.
naudioin 0,
<positive integer>
0/7 Number of audio inputs.
naudioout 0,
<positive integer>
0/7 Number of audio outputs.
nvideoin <positive integer> 0/7 Number of video inputs.
nmediastream <positive integer> 0/7 Number of media stream per channels.
nvideosetting <positive integer> 0/7 Number of video settings per channel.
naudiosetting <positive integer> 0/7 Number of audio settings per channel.
nuart 0,
<positive integer>
0/7 Number of UART interfaces.
ptzenabled <positive integer> 0/7 An 32-bit integer, each bit can be set separately as
follows:
Bit 0 => Support camera control function;
0(not support), 1(support)
Bit 1 => Built-in or external camera;
0(external), 1(built-in)
Bit 2 => Support pan operation, 0(not support),
1(support)
Bit 3 => Support tilt operation; 0(not support),
1(support)
Bit 4 => Support zoom operation;
0(not support), 1(support)
Bit 5 => Support focus operation;
0(not support), 1(support)
Bit 6 => Support iris operation;
0(not support), 1(support)
Bit 7 => External or built-in PT; 0(built-in), 1(external)
Bit 8 => Invalidate bit 1 ~ 7;
0(bit 1 ~ 7 are valid),
1(bit 1 ~ 7 are invalid)
Bit 9 => Reserved bit; Invalidate lens_pan, Lens_tilt,
lens_zoon, lens_focus, len_iris.
0(fields are valid),