VIVOTEK - A Leading Provider of Multimedia Communication Solutions
26 - User's Manual
System Time
Keep current date and time: Select this option to reserve the current date and time of the Network
Camera� The Network Camera’s internal real-time clock maintains the date and time even when the
power of the system is turned off�
Sync with computer time: Select this option to synchronize the date and time of the Network Camera with
the local computer� The read-only date and time of the PC is displayed as updated�
Manual: The administrator can enter the date and time manually� Note that the date and time format are
[yyyy/mm/dd] and [hh:mm:ss]�
Automatic: The Network Time Protocol is a protocol serves synchronize computer clocks by periodically
querying an NTP Server�
NTP server: Assign the IP address or domain name of the time-server� Leaving the text box blank
connects the Network Camera to the default time-servers�
Update interval: Select to update the time with the NTP server on hourly, daily, weekly, or monthly basis�
Time zone
Advanced mode
: According to your local time zone, select one from the drop-down list� If
you want to upload the daylight saving time rules on Maintenance page, please refer to Upload / Export
Daylight Saving Time Conguration File on page 85 for details�
DI and DO
Digital input: Select High or Low to dene normal status of the digital input. The Network Camera will
report the current status�
Digital output: Select Grounded or Open to define normal status of the digital output� The Network
Camera will show whether the trigger is activated or not�
To Next Page
Loading...
