Vixel 9000 series User Manual

Vixel 9000 Series Installation & Configuration Guide APPENDIX B Default Firmware Settings
53
System Information
Note: Address Mode may
be different than displayed
here if switch was
customized. The Private
Addresses setting relates to
Fabric (Public/Private)
Mode only; for more
information, see “Options
for Fabric Mode and Fabric
(Public/Private) Mode” on
page 25.
>show system
Name : sysName not set
Location : sysLocation not set
Contact : sysContact not set
System Time :
Date :
Detected Ethernet :
Ethernet Mode : eth10half
Address Mode : Stealth-3
Boot Image : Image 2
Up Time :
System Domain ID :
Default Domain ID : 60
Private Addresses : 64
Principal Switch :
Priority : 254
Loop Fabric Address : disabled
RCF Disruptive mode : nonDestructive
Zoning
>show zones
Zoning Configuration Table
Port 1 2 3 4 5 6 7 8
1 * * * * * * *
2 * * * * * * *
3 * * * * * * *
4 * * * * * * *
5 * * * * * * *
6 * * * * * * *
7 * * * * * * *
8 * * * * * * *
’ ’ = Not Set
’*’ = Set
’-’ = Removed on apply
’+’ = Added on apply

Vixel 9000 series Specifications

General

Brand	Vixel
Model	9000 series
Category	Switch
Language	English