52
APPENDIX B Default Firmware
Settings
The settings listed below are as shown from the CLI unless noted otherwise. Fields
that do not apply to default settings are shown as empty. Commands prefaced by a
prompt (such as “>show system”) indicate what may be typed from the Root
Menu to display the related information.
Note: The default CLI passwords are password for the monitor/manage level and
public for the monitor only level. (Upgraded switches retain any preconfigured
passwords.) For security, passwords should be changed only through a serial
connection to the switch. Because the password-changing process is unencrypted,
using Ethernet or other types of connections to change passwords exposes the old
and new passwords to possible security breach.
IP Address, Netmask, and Gateway
>show communications
IP Address : 192.168.1.129
Netmask : 255.255.255.0
Default Gateway : 0.0.0.0
SLIP Address : 192.168.2.129
SLIP Netmask : 255.255.255.0
Modem Init String : ATE0V1Q0
IP Address, Netmask, and Gateway 52
System Information 53
Zoning 53
Port Configuration 54
Event Log & Fault LED 54
Stealth-3 Mode Settings 55
To Next Page
Loading...