Vizio M55-C2 User Manual

4
USING THE NETWORK CONNECTION MENU
Your TV is Internet-ready, featuring both an Ethernet port and
built-in high-speed Wireless-N.
Connecting to a Wireless Network
7R FRQQHFW WR D ZLUHOHVV QHWZRUN ZKRVH QHWZRUN QDPH 66Ζ' LV
being broadcast:
If your TV is connected to a network with an Ethernet
cable, you will not see the wireless network connection
menu. You must disconnect the Ethernet cable to set
up a wireless network connection.
 Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight Network
and press OK. The NETWORK
menu is displayed.
 If you do not see your wireless
network displayed, highlight
More Access Points and press
OK. The :Ζ5(/(66$&&(66
32Ζ176 menu, which is a list of
available wireless networks, is
displayed.
4. Highlight the name of your
wireless network (this is the
QHWZRUNȇV66Ζ'DQGSUHVVOK.
5. Using the keyboard on the
remote, enter your network’s
password, then highlight
Connect and press OK.
6. Press the EXIT button on the remote.
VIZIO
NETWORK
Wired Connection Disconnected
Wireless Access Points
More Access Points
WPS
Manual Setup
Hidden Network
Test Connection
Changing the Manual Setup Settings
$GYDQFHGXVHUVFDQȴQHWXQHWKHQHWZRUNVHWWLQJVXVLQJWKH0DQXDO
6HWXSIHDWXUH
To change advanced network settings:
 From the NETWORK menu,
highlight Manual Setup and
press OK. The 0$18$/6(783
menu is displayed.
2. To change the settings manually,
use the Arrow buttons on the
remote to highlight DHCP and
then use the Left/Right Arrow
buttons to change the setting to
2΍.
 Use the Arrow and OK buttons
to adjust each setting:
• IP Address - The IP address
assigned to the TV.
• Subnet Mask - The subnet
mask.
• Default Gateway - Your
network’s default gateway
address.
• Pref. DNS Server - Your
preferred domain name
server address.
• Alt. DNS Server - Your alternate domain name server
address.
4. Use the Arrow buttons on the remote to highlight Save and
press OK.
5. Press the EXIT button on the remote.
VIZIO
MANUAL SETUP
DHCP Off
IP Address ____.____.____.____
Subnet Mask ____.____.____.____
Default
Gateway ____.____.____.____
Pref. DNS
Server ____.____.____.____
Alt. DNS
Server ____.____.____.____
Wireless MAC 0:0:0:0:0:0
Save
Cancel
Finding MAC Addresses for Network Setup
The security settings on your router may require you to enter the
TV's MAC address in the router's settings.
7RȴQGWKH79V0$&DGGUHVV
 From the NETWORK menu, highlight Manual Setup and press
OK. The 0$18$/6(783 menu is displayed.
2. Find the MAC address for the TV at the bottom of the list. The
MAC addresses for the connections in use are displayed:
• RJ45 MAC - The Ethernet or RJ45 MAC address may be
needed to set up your network when you have connected
the TV to your network with an Ethernet (Cat 5) cable.
• Wireless MAC - The Wireless (WiFi) MAC address may be
needed to connect your TV to your network with WiFi.


Vizio M55-C2 Specifications

General

Screen Type	led
Wall Mount	300mm x 300mm
Features	32 active led zones, clear action 360, v6 six-core processor
Tuner	digital
Screen Size	55 inches
HDR	no
Built-In Speakers	yes
Surround Sound	dts trusurround
Speakers Output	30 watts
Number Of Speakers	2
USB Ports	1
RF Antenna	yes
Network	built-in wi-fi
Headphones Output	no
Digital Optical Audio Outputs	1
Analog Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	0
SmartTV	vizio internet apps (v.i.a.)
Remote Control	standard
3D	no
Power Consumption	244.2 kilowatt hours
Depth with Stand	10.01 inches
Height with Stand	30.37 inches
Width with Stand	48.8 inches
Net Weight with Stand	40.24 pounds
Depth without Stand	2.51 inches
Height without Stand	28.03 inches
Net Weight without Stand	39.24 pounds