VlZlO VW26L HDTV10F User Manual
1.
2.
.
.
5.
Connectinq Your VCR or Video Camera
Turn off the HDTV and VCR or Video Camera.
Connect the S-Video jack on the rear of your VCR or
Video Camera to the S-Video jack in the AV2 group
on the side of the HDTV.
Connect an audio cable (white and red connectors)
cable to the audio output connectors associated with
the S-Video output on your VCR or Video Camera
and connect the other end to the audio connectors
associated with the AV2 input on the side of the
HDTV. _11_
Turn on the power to the HDTV and VCR or Video
Camera.
Select AV2 using the INPUT button on the remote or
side of the HDTV, or directly by pressing the AV button on the Remote Control.
Connectinq Connectinq a PC Computer
HDMI1
HDMI
HDMI2 R
AV 1
.
2.
.
.
5.
Turn off the power to the HDTV and
PC Computer.
Connect a 15-pin D-Sub RGB (VGA)
cable to the RGB output of your pc
computer and the other end to the
RGB PC input (blue area) at the rear
of the HDTV.
Connect the Audio Out on your pc
computer to the RGB PC Audio input
(blue area) at the rear of the HDTV.
Turn on the HDTV and PC Computer.
Select RGB using the INPUT button
on the remote or side of the HDTV, or directly by pressing the RGB button on the Remote.
Version 2/6/2007 23
www.VlZlO.com
To Next Page
Loading...
Need help?
General
