VlZlOVW26LHDTVIOFUserManual
4-3,4 Balance
Press the _ button to highlight the Balance selection.
Press the_ button to start adjusting the balance and the menu page will disappear and be replaced by a
small Balance Indicator Bar, as before, so you can see the balance adjustment to the left or right of the
nominal position. Use the D or _ button to adjust the left/right balance.
4- 3, $ Surround
Press the _ button to highlight the Surround selection.
Press the _ button to select for the simulated surround sound feature to be On or Off.
4,4 TU Setup
When you first used your VW26L you will have setup your TV for DTV / TV channels using the Initial
Setup screens, tf you did not do this or if your setup has changed, you can do this from the TV TUNER
SETUP menu.
4,4°! TV Input
When the MENU button is pressed, the On Screen
Display (OSD) appears on the PICTURE
adjustment page. Press the _ button to display
the TV page.
Press the
selection.
button to highlight the TV Input
A
Press the I_ button to choose Cable or Air
(Antenna) depending upon which equipment you
have attached to the DTV / TV Input.
4.4,s Auto Search
Press the _ button to highlight the Auto Search
selection.
Press the _ button to Auto Search for TV
channels available. The TV will automatically
search for analog and digital channels.
Version 2/6/2007 35
www.VlZlO.com
To Next Page
Loading...
Need help?
General
