VlZlOVW26LHDTV10FUserManual
4.2,7 Tint
Press the _ button to highlight the Tint selection.
Press the _button to start adjusting the tint and the menu page will disappear and be replaced by a small
Tint Indicator Bar so you can see the tint adjustment to the left or right of the nominal position.
Use the D or _ button to adjust the level.
The Tint adjusts the hue of the picture. The easiest way to set tint is to look at flesh tones and adjust for
a realistic appearance. In most cases, the default middle position is correct. If people's faces look too
orange try reducing the level of color first as the case of this is often too much color
4.2.8 CoLor Temperature
Press the _ button to highlight the option for
Color Temperature selection.
The default is COOL; this is the 9300K setting.
Press the D or _ button if you want to choose
the Normal (6500K) or Warm (5400K) option.
Normal is best for viewing TV Programs and
Movies.
If you choose the Custom option, then a new
menu will be displayed showing the primary color
items, Red, Green and Blue. Press the _ button
to highlight the color you wish to adjust.
Press the _ button to start adjusting the color and
the menu page will disappear and be replaced by
a small Color (Red, ,,.._Greenor Blue) Indicator Bar
as before. Use the _ or _ button to adjust the
color.
Press the OK button when finished. Repeat the
procedure to adjust the other colors if desired.
Version 2/6/2007 32
www.VlZlO.com
To Next Page
Loading...
Need help?
General
