VlZlOVW26LHDTVIOFUserManual
4-4-3 Skip Channet
After the TV has stored all of the available DTV channels in memory you will find that some channels will
be too weak to watch comfortably or they may be channels you do not want to see. Select the channel
you wish to remove, press the MENU and _ buttons to open the TV TUNER SETUP menu and then
press the_ button to highlight SKIP CHANNEL. Press the_ button to select this channel to be skipped
when using the CH+ or CH- button. You will still be able to select this channel using the number buttons
on the remote control.
4-4,4 Time Zone
Setting the correct Time Zone for your area will
ensure that the correct program times are shown
after pressing the GUIDE button on the remote
control.
Press the _ button to highlight the Auto Search
selection.
Press the _ button to select your area.
4,4-5 DavUQht Savinq
As for Time Zone, setting the daylight saving time
for your area will ensure that the correct program times are shown after pressing the GUIDE button on the
remote control. Press the _ button to highlight the Daylight Saving selection. Press the _ button to
select On or Off.
4.5 DTV / TV Input Parental Control
4°S,1 Channel Block
If you want to restrict certain channel and program viewing, you can do this by turning on the Parental
Control. Selected programs, movies and channels can then be made available only after an authorized
password has been entered and accepted by the TV.
When the MENU button is pressed, the On Screen
Display (OSD) appears on the PICTURE
Press the QI button toadjustment
page.
display
the PARENTAL page.
The Password must be entered before the TV will
continue with Parental settings. The default
password set in the factory is 0 0 00. If you are
going to use the Parental Control feature you
should change the password.
Version 2/6/2007 36
www.VlZlO.com
To Next Page
Loading...
