MR 700
19
Ed. 3 - 2012_11
English
In order to guarantee the perfect con-
servation of all engine components, an
“overseas” packaging should be used in
case of maritime transport.
The packaging contains all the informa-
tion needed to carry out the loading and
unloading operations.
During transport, make sure the load is
properly secured to the means of tran-
sport to avoid unexpected displacements.
When transporting the uncovered engine
by road, use the lifting points provided to
secure it steadily and prevent componen-
ts from being damaged.
UNPACKING
Follow the procedure below.
1 -Remove the cover of the packaging.
The packaging includes a bag with all
the relevant technical documentation and
standard components.
2 -While unpacking, make sure the
components are intact and their quantity
is correct.
3 -Place the lifting device as shown in the
gure.
4 -Loosen the screws (A) and disassem-
ble the side supports (B).
5 -Move the engine to the installation
area.
If necessary, keep the material in case
you need to pack the engine in the future.
Important
In case of any damage or missing
part, contact the manufacturer’s
Assistance Service to establish
the procedure to be adopted. The
packaging material should be sui-
tably eliminated in compliance with
the applicable legislation.
Screw (A)
Support (B)
To Next Page
Loading...
Need help?
General