MR 700
59
Ed. 3 - 2012_11
English
Important
Before restarting the engine, make sure there are no tools or other material left
near the moving parts. Do not throw away any replaced part in the environment.
Carry out their disposal in compliance with the relevant legislation in force.
INLET AIR FILTER REPLACEMENT
Model MR704
Follow the procedure below.
1 -Turn off the engine and remove the
ignition key.
2 -Let the engine cool down adequately to
avoid being burnt.
3 -Unscrew the nuts (A).
4 -Remove the bracket (B).
5 -Remove the protection (C) and replace
the cartridge (D).
6 -Reposition the protection (C).
7 -Reposition the bracket (B) and block it.
Model MR706
Follow the procedure below.
1 -Turn off the engine and remove the
ignition key.
2 -Let the engine cool down adequately to
avoid being burnt.
3 -Loosen hose clamp (A) and remove
the lter (B).
4 -Extract sponge (C) and replace it.
5 -Replace the lter (B) and x it using the
hose clamp (A).
bracket (B)
nut (A)
cartridge (D)
housing (C)
clamp (A)
sponge (C)
lter (B)
lter (B)
To Next Page
Loading...
Need help?
General