R750EU5 - IE3 - TE4 - IE4 - ISE4
English 13 Ed.8 / 10-2012
GB
Unit of
measure-
ment R754EU5 R756EU5
Cooler water/oil
Crankshaft rotation
Anticlockwise (observing the engine from the handwhe
el side)
Combustion sequence 1-3-4-2 1-5-3-6-2-4
Timing
Pushrods and rocker arms
With hydraulic tappets and camshaft
Gear cascade control and camshaft tted on the
crankbase
Minimum idling speed (standard
engine) rpm 800 +/-50 750 +/-50
Dry shipping weight of engine kg 260 335
Maximum permanent lengthwise
inclination (with handwheel up) degrees 30° 30°
Maximum permanent lengthwise
inclination (with handwheel down) degrees 35° 35°
Maximum permanent crosswise
inclination degrees 30° 30°
Power and torque
Maximum operating speed rpm 3000 3000
Maximum power
kW (CV) @
rpm 74 (100) @ 3000 120 (163) @ 3000
Maximum torque
Nm (kgm)
@ rpm 340 (34,68) @ 1350 500 (51) @ 1350
Consumption at maximum
power
Specic fuel consumption g/kWh 274 254
Specic oil consumption g/KWh 0,2 0,2
Fuel supply circuit
Type of injection Common Rail direct injection
Type of fuel
The engine has been designed to be powered by standard
fuels available on the European market (according to
specications DIN EN 590). If it is to be powered by
BIODIESEL fuels (according to specications UNI EN
14214), it can be mixed, up to 5%, with fuel available on the
European market (according to regulation DIN EN 590).
i
IMPORTANT
Do not use fuels with specications other than
those indicated.
To Next Page
Loading...
